Solderless Silver Conductive Adhesive paste - PCB Electronics  Repair Soldering

• Soldering Iron in a Syringe!
  The solution when you can't find the soldering iron, don't want to bother or your out in the woods!
  This silver adhesive conducts low voltage AC and DC circuits in a permanent bond and is easy to use. 

   It's easy to use! no heat or solder gun required.
  Great for for joining wires and repairing PCB's.

   Repairing defect traces/tracks or creating smooth jumpers on PCB board.

   It can be used for repairing membrane switches.

   Perfect for both rigid & flexible substrates.

   It's widely used in electrical items PCB circuit boards, CPU in computers, LED display, lcd display, controller, heat sink and LED etc. etc.

  Silver Conductive 0.2ML Electrically paste Adhesive Paint PCB Repair 

  Please note: Make sure the paste is warm at room temperature for it to flow correctly

   It must be used thinly like solder and in warm conditions you can use something like a hair dryer to help speed up curing time.

   If you apply really thick it will not cure properly so if it is needed thicker build it up in layers.

  Specifications:
  Solid powder 60-80% 1) Has excellent electromagnetic shielding effectiveness.
  2) Can be used for ABS, PC, ABS / PC plastic with excellent adhesion to the substrate.
  3) 100% pure silver powder medium, with excellent conductive properties.
  4) Excellent wear resistance.
  5) Excellent moisture resistance.
  6) Excellent drying time Approx. 20-60 mins. (depending on how warm conditions are)

   (If you want to dry rapidly, blow with a hair dryer for 5 - 10 minutes)
  
  Technical Data:

   Weighting 25Degree 1.46-1.48g/cm3
  Resistance <0.02 ohm="" sq="" film="" thickness="" of="" 12="" microns="" span="">
  Viscosity> 20000CPS
  Shielding effectiveness> 80dB
  Recommended dry film thickness of 12-16 microns
  Recommended Thinner Thinner ethanol
  Dilution ratio conductive paint: thinner = 1:0.7-0.8 (weight ratio)
  Humidity environmental test 85 Degree / 85% RH constant resistance value after 7 days
  Dry conditions 60 Degree 20 min (you can use a hair dryer or heat gun heat cure faster)

• Features:
  Condition: 100% Brand New
  Type: Silver Conductive Adhesive paste (Solderless)
  Color: Silver
  Material: Silver-filled epoxy compound
  Application: PCB trace repair, wire bonding, circuit restoration, and component connection
  Curing: Air-dry type (no heat or soldering required)
  Adhesion: Excellent bonding strength on metal, glass, plastic, and PCB substrates

• Package Includes:
  1 × Silver Conductive Adhesive paste Tube (Solderless Type)
  Protective Packaging for Safe Shipping